Silicon carbide cutting material is a relatively common abrasive product. Do you know how it works? That is its working principle, let’s take a look at the introduction of relevant knowledge together!
The working principle of silicon carbide cutting material:
the material enters the grinding chamber of the main machine, and the grinding roller swings outward under the action of the centrifugal force when the main shaft rotates, the grinding roller is pressed tightly on the grinding ring, and the material scooped up by the blade is sent to the grinding roller and the grinding wheel. Between the rings, the material is repeatedly crushed by rolling under the action of the rolling of the grinding roller and the pressure between the grinding ring, and the crushed material is mixed with the induced airflow in the main mill chamber to become fluidized.
Under the action of the centrifugal force of the classifying wheel and the induced wind force of the system, the separation of coarse and fine particles is realized. The coarse particles that do not meet the particle size requirements fall back to the crushing area and continue to be crushed. The qualified fine powder enters the classifier for sorting, and the finer fine powder enters the cyclone collector. , under the action of centrifugal force, the fine powder rotates and descends along the wall of the cyclone collector, and is separated at the tail of the inner cone. After separation, the finer powder enters the pulse collector, and the purified gas is discharged into the atmosphere through the induced draft fan. The whole system works under negative pressure.
I hope that after reading the above introduction, you will get a certain amount of benefits. It is our honor to be able to help you. You are welcome to call for more latest information on silicon carbide cutting materials.